Starter Repair Kit - End Cap and Brushes - Mercury - 35-50 hp - OMC Johnson Evinrude - 25-140 hp, 1.6 - 2.0 L

STARTER REPAIR KIT - END CAP & BRUSHES - MERCURY - 35-50 HP - OMC JOHNSON EVINRUDE - 25-140 HP, 1.6-2.0L
ARCO SR366, SR370, SR371, SR372, SR385, SR386, SR389

Fits the following Mercury engines - (HP - Serial # - Year)

- 35 hp 2 cyl - 1571114 & up - 1963-69 -
- 35 hp 2 cyl - 6445653 & up - 1984-86 -
- 35 hp         - B110789 & up - 1987-1989 -
- 40 hp 2 cyl - 2874704 & up - 1970-79 -
- 40 hp 2 cyl - 5556230 & up - 1980 & up - OE Part Number Needed for Correct Replacement -
- 40 hp         - 5556230 & up - 1980 & up - OE Part Number Needed for Correct Replacement -
- 50 hp 4 cyl - 1421113 & up - 1963-75 -

 
Fits the following OMC Johnson Evinrude engines - (HP - YEAR)

- 25/40/50 hp       - 1989-95 -
- 35 JET            - 1992-97 -
- 35/40/50 hp       - 1986-88 -
- 40 hp             - 1984-85 -
- 40/50 hp          - 1988 -
- 40/50 hp          - 1996-05 -
- 45/55 hp          - 1988-90 -
- 48 hp             - 1987-89 -
- 48/50 hp          - 1990-96 -
- 50/55 hp          - 1977-85 -
- 50/60 hp TTL      - 1997-98 -
- 50/60/70 hp       - 1997-98 -
- 60 hp             - 1980-85 -
- 65 hp             - 1984-85 -
- 60/65 hp          - 1986-90 -
- 60/65 hp          - 1991-93 -
- 65 hp Commercial  - 1999-00 -
- 60/70 hp          - 1994-96, 1999-00 -
- 70/75 hp          - 1977-1980 -
- 70/75 hp          - 1981-93 -
- 70 hp             - 1999 -
- 80 hp JET         - 1994-97 -
- 85 hp             - 1994-97 -
- 85-115 hp         - 1977-93 -
- 88-112 hp         - 1994-96 -
- 90/100/115 hp     - 1994-98 -
- 100 hp Commercial - 1997 -
- 115 hp Turbo Jet  - 1997 -
- 120-140 hp        - 1985-90 -
- 120-140 hp 125ESX - 1991-93 -
- 125 hp            - 1991-93 -
- 130 hp            - 1994, 1997-99 -
- 120/125/140 hp    - 1994 -
- 135 hp            - 2000 -
- 140 hp            - 1982-84 -
- 1.6L V4 SeaDrive  - 1983-90 -
- 1.8L V4 SeaDrive  - 1987 -
- 2.0L V4 SeaDrive  - 1988-90 -
Approximate dimemsions from center hole to center hole (for mounting bolts) is 2 1/2".

If you have a question whether this item will fit your engine, please contact us at
[email protected]
and provide us with the hp, year and model # of your engine and we can verify it for you.